One of my recent brew sessions was to try to reproduce one of my favorite beers. My local craft brewery makes a vanilla porter but every once in a while, they make a batch “naked”, that is, without vanilla. Both Wife and I love that beer. The Dry Dock is very friendly to homebrewers, even making their recipes available to us (but as brewer Tim tells me, there’s always something they don’t tell). So I made the beer.
The end result is not a true clone but very, very good. I have a bit of a problem with dark beers and this one is very dark: There’s a strange flavor in the background I can’t get rid of. I think it may be the chocolate malt I’m using but I’m not sure. Maybe as a test I could brew the Naked Porter and leave the chocolate malt out. There’ll be more than enough carafa in the mix to darken and flavor it. Most of my darks have this note to some degree and it seems to fade somewhat with time so I know it’s not a process issue. But the Dry Dock doesn’t have it. And I can’t get rid of it.
In a couple weeks I’ll be doing sensory training – off flavors. Maybe I’ll find it then.
My one-gallon Baltic Porter turned out good enough to scale it up a bit. So what better to do on a Snowpocalypse day in Dever (we got a bit over a foot of snow, I’ve seen 40 inches out of a single storm. This was piddly stuff). I brewed. Got a late start on planning so instead of growing up a starter – a single vial or packet of yeast would have been far too little for this beer – I used dry yeast. Basic spex on the beer:
OG: 1.094 (Pred) 1.090 (Actual)
FG (Pred) 1.028, but I bet I get better out of it.
Single infusion mash, no water treatment, 90 minute boil, Magnum as bittering hops, Saaz for flavor.
A word on dried yeast. I normally use vials and starters but since I decided to brew too late to make one and a beer this big definitely needs one, I chose to use dry yeast, specifically Danstar’s West Coast Ale Yeast. Some believe it’s okay to sprinkle the stuff on the top of aerated/oxygenated wort and just forget about it. This works but it also kills off about half your cells. Danstar specifically recommends rehydration but when using dried yeast, I always rehydrate it. Here’s how:
Boil about 4 ounces of water per packet of yeast, cover it with aluminum foil and let it cool to 92 – 95 degrees. Sprinke the yeast over the top of the water and let it rehydrate for fifteen minutes. With a sanitized tool, stir the yeast to form a creamy slurry then add to your prepared wort. The yeast will perform better thanks to this little pick-me-up, they’ll hit the wort ready to go and do their best for you.
Carbonating a beer today, I realized something about priming sugar calculation. I’ve been using the priming sugar calculator at Brewer’s Friend and like all, it asks for the temperature of the beer.
Beer, as it ferments, produces carbon dioxide. In fact, fermented beer is a saturated carbon dioxide solution. As beer warms, carbon dioxide becomes less soluble and is driven off, a fact that explains why sometimes the airlock on a finished beer will start to bubble again if a beer is allowed to warm. If the beer warms then cools, if the cooling is not extensive, it may not take up the carbon dioxide into solution again or it may dissolve air instead. Either way, the warmed beer doesn’t have as much CO2 in solution as it had before warming.
The priming sugar calculator calculates based on two values, the amount of CO2 predicted to be in solution at the given temperature and the amount of additional CO2 produced by the yeast. The yeast are going to produce about the same amount of gas regardless, it’s the dissolved CO2 that’s the critical variable. If the beer has been warmed, then cooled, and you base your calculations on the cooler temperature, you may under-carbonate your beer.
More importantly, knowing how the calculators work, I let my lagers warm to room temperature, then calculate priming sugar additions and bottle. I don’t get overcarbonated lagers any more.
First, an apology. I haven’t posted because…. No excuses I haven’t posted. Thanks for all the views!
Two discoveries, actually. The first, bottling goes much faster when someone is helping you. I bottled a batch of Naked Porter, so-called because my favorite craft brewery, the Dry Dock in Aurora, Colorado, generally brews it with vanilla. Every once in a while they leave out the vanilla and it makes a great, very flavorful porter. Because the Dry Dock started out as a homebrew store, they’re very accomodating of homebrewers and will share their recipes (although Tim, one of the brewers there, assures me they won’t give you everything). So I brewed it. Aside from the discovery that the wife helping package speeds up the process by much more than a factor of two, it led me to the second discovery, why I’m not generally fond of my ales.
My house faces generally south-southeast and has a walk-out basement, home of course to Applied Zymurgy Brewing. Most days this winter the sun has come up under a cloud deck but on a few I walked into the basement and noticed how bright the sunlight shining in was. Now I’m no fool: My carboys were never in a place where they could be hit by direct sun! But I’ve noticed that my lagers held their flavor in secondary much better than my ales. The flavor seems to diminish and there’s a strange note in the background. Today it hit me what that was. It wasn’t what I’d call “skunk” or rubber and it wasn’t overpowering but there. Due to the light reflected off the bright white insulating surfaces on the basement walls, my ales were skunking.
I intend to test the hypothesis by brewing a batch, splitting the secondary, shielding one half from the strong light and letting the other half stand. I’ll publish the results of the test, likely brew after next since I’m getting a strong desire for an IPA. Discovery is a joy to me, testing this idea may or may not result in better beer but the test itself will be fun.
Ski season progresses, most everything slows down when there’s snow in the high country and lifts running to help exploit it. So there, my reason for slower than usual publication of this blog.