Kettle Souring

I got the tip on how to do this from Tim at the Dry Dock Brewery.  He’d given us a taste of his “Regal Tang” so I asked where the pineapple and mango flavors came from.  Turns out he’d used yoghurt to pitch lacto into hot wort, left it overnight, then boiled with hops the next day.

So I tried a batch.  I mashed, ran off the wort, boiled it for ten minutes, stuck a thermometer probe into it and cooled it to 120 degrees.  At 120 degrees, I pitched a couple teaspoons of my sourdough starter into it, insulated the heck out of it (as best I could), then left it overnight.  The next morning I checked the pH.  It was about 4.1, I wanted in the vicinity of 3.5.  I let it set a couple of hours then checked again.  4.0.  So I turned my hot plate on low.  The wort began to warm very slowly.  Seeing that it wasn’t about to get away from me, or so I thought, I went upstairs to take a shower.  When I came back to the wort, the pH was 3.9, okay, but the temperature was 151 degrees.  I’d killed my lacto.  So I boiled, fermented and still got a pretty good beer out of it, not as tart as I’d like but still nice.  Unfortunately, I didn’t take pictures.

New procedure involves my Inkbird temperature controller.  It controls both heating and cooling.  I generally use it to control my fermentation chamber – it’s holding the temperature above room temp for my 90-degree Belgian Saison.  Next batch I run my hot plate through it controlled to 120 degrees (50 celsius) with the probe in the wort.  The controller in Celsius mode holds the temperature to +/- 0.3 degrees, effectively 1 degree Fahrenheit, and the temperature is adjustable to 0.1 degree Celsius.  Interesting because the actual conversion of 120 degrees F is 48.9 degrees C.

So why kettle sour when there are other alternatives such as sour mashing, Brett fermentation, wild yeast, sour blends.  The literature will tell you, at least the snobbish parts, that kettle souring lacks “complexity” compared to other souring methods.  Here are my reasons for kettle souring above the others:

1.  It’s very controllable.  Some other methods give you what you get.  Souring in the kettle leaves you in control – you can stop the process at whatever level of tartness you want for the effect you want.  I’m even thinking of a very short kettle souring for my next batch of Irish Stout, since Guinness is rumored to use stale (read old), slightly soured beer in their blending process.

2.  You don’t contaminate equipment.  You boil the kettle after souring, killing off all the lacto before it can infect your next batch.

3.  It’s fast.  No waiting for a year or so for your Brett or your Lacto pitch to sour the beer.

4.  You can even control what you pitch.  Yoghurt works, sourdough starter works, natural sauerkraut would work, even pitching grains would provide lacto.

5.  Less chance of the enteric bacterial stench.  No need to stink up your work area.

6.  Most important, I like the results.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s